Snap-on Tools EEDM604E Digital Hybrid CAT III 1,000-Volt Multimeter

Color VA Type LCD Display - 50,000 count with 51 segment bar graph
Triple Display - activated with REC, REL, PEAK-H buttons
REC (Record Mode): store minimum, maximum and average readings over a measurement period
RANGE: manual range option for each function
PEAK-H: peak hold button engages .25 millisecond rapid signal capture function to catch glitches
COMP (Compare): activates the compare function to compare your reading against a known standard
REL% (Relative Percent Mode): factor out lead resistance for improved low ohm measurements or compare readings to a known standard—can also be used for differential measurements
Gray button: use to select gray functions noted on meter
HOLD: lock the reading on the display for hard to read locations for future reference
Ohms, Conductance, Continuity: toggle between measuring resistance, conductance and continuity buzzer
ACmV/ DCmV(AC or DC millivolts): measure up to 500 AC or DC millivolts
ADP (Adaptor mode) - direct readout on the LCD when using optional accessories
DCV (DC Volts) - measure up to 1,000 V
ACV/Hz (AC Volts and Frequency) - measure up to 1,000 V AC - Push the grey button to view frequency, duty, and mS pulse width of the signal
Diode Test - test for good, open, or shorted diodes in circuits
CAP (Capacitance) - measure the capacitance of condensers and capacitors
Hz (Frequency) - measure the frequency, duty and pulse width of sensors and signals. Also used to measure temperature (gray button)
AC/DC Current Functions (Amps) - measure the parasitic draw from the battery with ignition off
External Testing of Internal Fuses - you can determine the status of the internal fuses before you open the battery/fuse compartment

Snap-on Tools EEDM604E Multimeter
EETA501C Clamp-On Amp Probe
Test leads
Temp cord

This multimeter is previously owned and inspected fully. There are surface marks on the body from light use and handling. Tested fully and works well. See images for details.