Hilti TE 76 Rotary Chipping Hammer Demolition Drill

The TE 76-ATC is designed for commercial and professional use. The rated power of the unit equals 1300 watts, with a nominal voltage of 120 volts and nominal current input of 13.0 amps. Running on a frequency of 50 to 60 hertz, the speed of this rotary hammer is approximately 0 to 200 revolutions per minute. Typical drilling performance in medium-hard concrete at 3/4 inch diameter equals 14.2 inches per minute; 1 inch diameter is approximately 11 1/2 inches per minute, and at 1 1/4 inch diameter a little over 7 inches per minute. Chiseling performance in the same type of concrete is just over 35 cubic inches per minute. The TE 76-ATC measures 20 inches long by 11 1/3 inches high and 4 1/2 inches wide.

Hilti TE 76 Rotary Chipping Hammer Demolition Drill
Drill Bits
Case (Note it is broken)

This Hilti Rotary Chipping Hammer Demolition Drill is previously owned, is used, and it is moderate to heavy condition. There are heavy wears on the item, heavy scratches, paint chipping away from the tool, rust on the tool and there are heavy stains on the item from use handling. Note: There is rust on the tool and bits. The tool works it has a lot of cosmetic wear on it. The case that holds the tool is broken and it will not latch shut because the latches are no longer there. Tested, see images for details.

Orders are processed and shipped within one to two business days Monday through Friday 9:00 am – 5:00 PM. Your satisfaction is our primary goal! If for any reason you are not satisfied, we offer a 10 day money back guarantee from date of purchase for in-store pick-up orders and 15 day money back guarantee from date of purchase on shipped.